The FlareLab Workshop: Custom Joe Eyeball Print
This Joe Eyeball and Bazooka figure project focused on clean model-to-print execution, transforming a digital character model into a reliable physical display piece. Inspired by the TMNT universe, the figure features exaggerated proportions and playful styling that make the character instantly recognizable even at a smaller scale.
For projects like this, maintaining the integrity of the original model is just as important as print stability. The geometry was carefully reviewed and prepared to ensure thin sections, overhangs, and rounded features would print cleanly without compromising detail. Support placement and orientation were optimized to preserve visible surfaces while minimizing post-processing work.
Printed in gray filament, the figure retains a neutral prototype-style finish that works well for collectors who prefer raw prints, while also serving as an excellent base for sanding, priming, and custom paint applications. Surface settings were tuned to keep layer consistency smooth across curved areas such as the head, limbs, and accessory details.
The result is a fast yet clean character print suitable for display shelves, themed collections, or as part of a larger figure setup. Projects like this highlight how proper preparation bridges the gap between digital models and finished physical props.
Items Used
Gray Filament
Total Printing Hours
1 hr 20 mins
Frequently asked questions
What is the Joe Eyeball figure inspired by?
It's a fan-style character figure inspired by the TMNT universe — specifically the playful, exaggerated proportions of the Joe Eyeball and Bazooka characters. The print is intended as a display piece, not an officially licensed product.
What size is the figure and how long does it take to print?
This particular figure was printed in 1 hour 20 minutes at a small display scale. Most fan figures of similar size land in the 1–3 hour range depending on detail level and orientation.
Can the figure be painted after printing?
Yes. Gray PLA is a great base for paint. Sand the surface lightly, apply a primer coat, then build up the colors with acrylics. Matte topcoats help reduce any remaining layer-line shimmer and protect the paint.
Are supports necessary for this kind of figure?
Usually yes — figures with thin limbs, overhanging arms, or accessories like bazookas need light supports. Tree supports give the cleanest finish and are easier to remove than grid supports.
What slicer settings keep small character prints crisp?
A 0.4 mm nozzle with 0.12–0.16 mm layer height captures small details well. Use 3 wall perimeters and 15–20% infill for a balance of strength and speed. Slow your outer wall speed to about 30 mm/s for cleaner curved surfaces.
Can Flarelab print custom character figures from my own model?
Yes. Send your STL or reference images to flarelab.com and the team can prepare the model, optimize supports, and recommend a finish. Custom scaling and color choices are also part of the service.